Physicists sent a message through a brick wall using gravity
Physicists from the University of Queensland transmitted the word 'Gravity' through a brick wall over a distance of 0.7 meters. The signal was received by a gravimeter in an adjacent room.

To transmit the message, the scientists moved an elevator counterweight weighing approximately 1.8 tons between two positions, representing 0 and 1. The change in the gravitational field was recorded by a conventional spring gravimeter.
Moving the mass altered the device's readings by about 50 nm/s². The word was encoded in 49 ASCII bits and sent at a rate of 1 bit per minute. The received sequence matched the original exactly.
Unlike a radio signal, the gravitational effect of the moving mass cannot be passively blocked by ordinary materials. However, the physicists were not transmitting gravitational waves but changes in a nearly static Newtonian field.
The idea emerged during work on contactless weighing systems for trucks. The authors note that the current method is extremely slow and suitable only for short distances. Even with a more modern elevator and a sensitive sensor, the estimated speed would be around 15 bits per minute.
According to the team's calculations, combining a compact mass, improved setup geometry, and more sensitive sensors could increase the range to approximately 500 meters. This is only a theoretical estimate, not an experimental result.




